Agilent Technologies 6890 Series Service Manual page 80

Gas chromatograph

Hide thumbs Also See for 6890 Series:

Table of Contents

Figure 220-10

Make sure that the carrier gas source pressure is at least 35 psi. Carrier source

pressure should always be at least 10 psi greater than the desired inlet

Leak testing—EPC and manual inlets

Capping the bottom of the inlet and septum purge vent

Agilent 6890 Gas Chromatograph Service Manual

Purged/Packed Inlet

Septum purge vent

Troubleshooting

6890a 6890 plus