Agilent Technologies 6890 Series Service Manual page 34

120 Tools Required
Tools required
The following tools are required to perform the service procedures described
in this manual.
Basic
Electrostatic discharge (ESD) protective wrist strap
T-10 — Torx screwdriver
T-20 — Torx screwdriver
1/4-inch hex nut driver
Open end wrenches:
5/16-inch x 1/4-inch
1/2-inch x 7/16-inch
9/16-inch x 7/16-inch
7–mm hex nut driver
Tweezers
Jun 2001
Before Servicing the Instrument
Agilent 6890 Gas Chromatograph Service Manual
1 of 2