Agilent Technologies 6890 Series Service Manual page 255

320 Nitrogen Phosphorus Detector (NPD)
Replacement procedures
Mounting bracket
Gang fitting installs here
Ribbon cable
Figure 320-12
3. Peel the blank label from its backing and paste it on the mounting bracket
over the screw heads. See Figure 320-12.
24 of 32
(FPD shown above)
Bracket mounted onto the manifold
Detectors
Agilent 6890 Gas Chromatograph Service Manual
Finger-tighten nuts.
Do not use a wrench.
7/16-inch hex nuts
ID tag through
slot in bracket
Jun 2001