Agilent Technologies 6890 Series Service Manual page 749

1310 Inlets
Purged/packed inlet
Purged/packed inlet
Description
1. Screws, Torx T-20, M4 × 12 mm
2. Top cover plate
3. Top insulation
4. Septum nut
5. Septum, 11 mm, low bleed (50/pkg)
6. Nut, Merlin Microseal
7. Septum, Merlin Microseal
8. Top insert weldment
9. Viton O-ring (Pkg/12)
10. Heater/Sensor assembly
11. Screw, Torx T-10, M3 × 16 mm
12. Inlet weldment
13. Top gasket insulation (not shown)
14. Thermal block
15. Bottom nut
16. PPIP insulation
17. PPIP bottom insulation
18. Glass insert (pkg/25)
19. Vespel ferrule (pkg/10)
20. Tubing nut (1/4-inch brass)
21. 530 µ Column liner (see the Agilent chemical analysis
consumables and accessories catalog)
1/8-inch Column adapter (optional)
22. Nut warmer insulation
23. Nut warmer cup
24. Ferrules (identify by internal diameter):
Solid ferrule plug (no hole)
Graphite ferrule 0.5 mm ID
Graphite ferrule 1.0 mm ID
25. Column nut (Order no. 5180-8830 2/pkg
12 of 36
Illustrated Parts Breakdown
Agilent 6890 Gas Chromatograph Service Manual
Part no. Qty.
0515-2496 3
G1543-00085 1
G1543-00100 1
18740-60835 1
5182-0739 –
5182-3445 –
5182-8815 –
19243-80570 1
5080-8898 1
G1543-61540 1
1390-1022 1
G1543-80580 1
G1543-00155 1
G1543-20765 1
G1543-20580 1
G1543-00030 1
G1543-00070 1
5080-8732 1
5080-8774 1
5180-4105 10/pkg
19244-80540 1
19243-80510 –
19234-60715 3
19234-60700 1
5181-7458 1
5080-8853 10/pkg
5080-8773 1
18740-20870 1
Jun 2001