Multicast - Siemens SCALANCE XM-400 Configuration Manual

Configuring with Web Based Management
5.3 The "Information" menu
Description of the displayed values
This table contains the following columns:
● VLAN ID
Shows the VLAN-ID assigned to this MAC address.
● MAC Address
Shows the MAC address of the node that the device has learned or the user has configured.
● Status
Shows the status of each address entry:
– Learnt
– Static
– Other
● Port
Shows the port via which the node with the specified address can be reached. Frames
received by the device whose destination address matches this address will be forwarded
to this port.
5.3.10

Multicast

5.3.10.1 Multicast
Status of the multicast filter table
This table shows the multicast frames currently entered in the multicast filter table and their
destination ports. The entries can be dynamic (the device has learned them) or static (the user
has set them).
Note
The device does not learn any reserved multicast addresses, see also RFC 5771.
110
The specified address was learned by receiving a frame from this node and will be
deleted when the aging time expires if no further packets are received from this node.
Note
If there is a link down, learned MAC entries are deleted.
Configured by the user. Static addresses are stored permanently; in other words, they
are not deleted when the aging time expires or when the switch is restarted.
The specified address is learnt indirectly through private VLAN.
SCALANCE XM-400/XR-500 Web Based Management (WBM)
Configuration Manual, 05/2017, C79000-G8976-C248-12