Fiber Optic Ethernet Ports; Serial Ports - Siemens RUGGEDCOM RS910 Installation Manual

4.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Reg-
istered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
Port Types
1
1
2
Figure 4.4
1
1
2
Figure 4.6
LEDs
Each port features an LED that indicates the link/activity state of the port.
Yellow (Solid)
Yellow (Blinking)
Off
Specifications
For specifications on the available fiber optic Ethernet ports, refer to
ernet Port Specifications (Page
4.3

Serial Ports

The RUGGEDCOM RS910 supports DB9, RJ45 and ST (Straight Tip) fiber serial ports,
all of which can be run in RS232, RS485 or RS422 mode.
RUGGEDCOM RS910
Installation Manual, 02/2020, C79000-G8976-1029-09
2
Tx Connector
Rx Connector
MTRJ Port
Tx Connector
Rx Connector
SC Port
State
1
Tx Connector
1
Rx Connector
2
Figure 4.5
2
1
Tx Connector
1
Rx Connector
2
Figure 4.7
Link established
Link activity
No link detected
29)".
Communication Ports
4.2 Fiber Optic Ethernet Ports
2
LC Port
2
ST Port
Description
"Fiber Optic Eth-
23