Purpose
Syntax
Instructions
Example
2
C h a p t e r
NAT Configuration
Table of Contents
ip nat................................................................................ 9
ip nat logging....................................................................11
ip nat multipool .................................................................12
ip nat pool ........................................................................12
ip nat service ....................................................................13
ip nat start .......................................................................14
ip nat stop........................................................................14
clear ip nat statistics
Use this command to clear the statistics data of NAT conversion.
clear ip nat statistics [max-dynamic-trans | max-local-ip]
The cleared statistics include numbers of NAT successes and fail-
ures, number of aged NAT translations, and number of cleared NAT
translations.
�
This example describes how to clear the NAT statistics in the
current system.
ZXR10#clear ip nat statistics
ZXR10#show ip nat statistics
Total active translations: 3066 (1 static, 3065 dynamic)
Maximal active dynamic translations: 3237
Current local ipaddrs: 2(3238 maximal)
Outside interfaces:
fei_6/8
Inside interfaces:
fei_6/1
Hits:
0
(uEngine: 0; protocol: 0)
Misses: 0
(uEngine: 0; protocol: 0)
Expired translations: 0
Clear translations:
Confidential and Proprietary Information of ZTE CORPORATION
0
7