ZXR10 Command Manual (IPv6 Volume)
Purpose
Command Modes
Syntax
Instructions
Example
Purpose
Command Modes
Syntax
Instructions
Example
Purpose
Command Modes
Syntax
8
Confidential and Proprietary Information of ZTE CORPORATION
clear ipv6 nat statistics
Use this command to clear the Network Address Translation-Pro-
tocol Translation (NAT-PT) statistics.
Privileged EXEC
clear ipv6 nat statistics
The statistics cleared includes: the number of the success and
failure of translation of the microcode, the number of the success
and failure of translation of the protocol, the number of packets
received by the protocol and the number of entry of the ageing
translation.
This example describes how to clear the Network Address Trans-
lation-Protocol Translation (NAT-PT) statistics.
ZXR10#clear ipv6 nat statistics
ZXR10#show ipv6 nat statistics
Total active translations: 0 (1 static, 2 dynamic)
V6V4 UEngine (Succ: 0
V4V6 UEngine (Succ: 0
V6V4 Protocol (Succ: 0
V4V6 Protocol (Succ: 0
Protocol received: 0
Expired translations: 0
clear ipv6 nat translations
Use this command to clear the Network Address Translation-Pro-
tocol Translation (NAT-PT) entry.
Privileged EXEC
clear ipv6 nat translations
This command is supported after the platform version 4.6.02.
This command clears information about all NAT-PT dynamic trans-
lation entries.
This example describes how to clear the Network Address Trans-
lation-Protocol Translation (NAT-PT) entry.
ZXR10#clear ipv6 nat translations
clear nd cache
Use this command to clear the entries of the Neighbor Discovery
(ND) cache except the entries corresponding to the address of local
router.
Privileged EXEC
clear nd cache [<interface>]
Src Misses: 0
Des Misses: 0)
Src Misses: 0
Des Misses: 0)
Src Misses: 0
Des Misses: 0)
Src Misses: 0
Des Misses: 0)