Table of Contents
Advertisement
3.7.3 Delete Static Route
To delete a static route, perform the following steps:
1.
Choose Security>Static Route.
2.
Choose the item to be deleted, and click Delete.
4 Wi-Fi
4.1 WLAN Setting
This function enables you to configure the Wi-Fi parameters.
4.1.1 Setting General Parameters
To configure the general Wi-Fi settings, perform the following steps:
1.
Choose Wi-Fi > Wi-Fi Settings.
2.
In the General Settings area, set WLAN to Enable.
3.
Set Mode to one of the values described in the following table:
Parameter Value
802.11b/g/n
802.11b/g
802.11b
802.11g
4.
Set the Channel No. from 1 to 11.
5.
Set the Tx Power from 20% to 100%.
6.
Click Submit. As shown in Figure 4-1.
Description
The Wi-Fi client can connect to the CPE in
802.11b, 802.11g, or 802.11n mode. If the
client connects to the CPE in 802.11n mode,
the Advanced Encryption Standard (AES)
encryption mode is required.
The Wi-Fi client can connect to the CPE in
802.11b or 802.11g mode.
The Wi-Fi client can connect to the CPE in
802.11b mode.
The Wi-Fi client can connect to the CPE in
802.11g mode.
Advertisement
Table of Contents
