Timers Lsa-Group-Pacing; Timers Spf - Zte ZXR10 8900 Series Command Reference Manual

All manuals and user guides at all-guides.com
Syntax
Description
<ip-address>
<net-mask>
OSPF has no summary address.
Defaults
�
Instructionsbbs
�
This example makes a summary of static routes 10.1.1.0/24,
Example
10.1.2.0/24 and 10.1.3.0/24 into one route and redistribute it to
OSPF.
ZXR10(config)#router ospf 1
ZXR10(config-router)#summary-address 10.1.0.0 255.255.0.0

timers lsa-group-pacing

Use this command to specify the time interval of OSPF lsa-group-
Purpose
pacing. Use the no form of this command to make OSPF lsa-group-
pacing restore the default value.
Router configuration
Command Modes
timers lsa-group-pacing <seconds>
Syntax
no timers lsa-group-pacing
Syntax
Description
<seconds>
This command is supported after the platform version 4.6.02.
Instructions
This example sets time interval of OSPF lsa-group-pacing as 2 sec-
Example
onds.
ZXR10(config)#router ospf 1
ZXR10(config-router)#timer lsa-group-pacing 2

timers spf

Use this command to specify the minimum time interval between
Purpose
two continual SPF computations. Use the no form of this command
to make it restore the default value.
Router configuration
Command Modes
timers spf <spf-holdtime>
Syntax
IP address, in the form of dotted decimal
IP subnet mask for the summary path, in the
form of dotted decimal
This command is supported after the platform version 4.6.02.
It is allowed to summarize multiple groups of addresses for a
specified level and routes obtained from other routing proto-
cols. The measurement metric for advertising summary paths
is the minimum one among all of the more detailed paths. This
command helps to reduce the size of the routing table.
Time interval of OSPF lsa-group— pacing,
unit: second, range: 1~2, default: 1 second
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 OSPF Protocol
95