Webui Configuration; Accessing The Configuration Page; Login; Settings - Zte MF288 User Manual

WebUI Configuration

Accessing the Configuration Page

1. Make sure the connection between your devices is active (either by cable or WiFi).
2. Launch the Internet browser, and then enter http://192.168.0.1 (or other IP if you
have changed it from the default) or http://setup.zte in the address bar.
NOTE:
It is recommended that you use IE (8.0 or later), Firefox (31.0 or later), Opera (23.0 or later),
Safari (6.2 or later) or Google Chrome (36.0 or later).
The login page will appear as follows.
3.

Login

In the WebUI Configuration page, select the desired language and input the password (the
default Password is admin).
Click Login to proceed.

Settings

Do not modify any settings unless instructed by your service provider.

Network Settings

Connection Mode
Select Settings > Connection Mode.
You can set the connection mode here. The default mode is Automatic.
10 Confidential and Proprietary Information of ZTE CORPORATION
ZTE MF288 User Guide