Table of Contents
Advertisement
5.1.3 Setting Allow access network within the rules
To set allow access network within the rules, perform the following steps:
1.
Choose Security>MAC Filtering.
2.
Set Allow access network within the rules.
3.
Click Submit. As shown in Figure 5-3.
5.1.4 Setting Deny access network within the rules
To set deny access network within the rules, perform the following steps:
1.
Choose Security>MAC Filtering.
2.
Set Deny access network within the rules.
3.
Click Submit. As shown in Figure 5-4.
5.1.5 Adding MAC Filtering rule
To add a MAC filtering rule, perform the following steps:
1.
Choose Security>MAC Filtering.
2.
Click Add list.
3.
Set MAC address.
4.
Click Submit. As shown in Figure 5-5.
Figure 5-3
Figure 5-4
Advertisement
Table of Contents
