Security; Mac Filtering; Enabling Mac Filter; Disabling Mac Filter - Zte WF820+ User Manual

5 Security

5.1 MAC Filtering

This page enables you to configure the MAC address filtering rules.

5.1.1 Enabling MAC Filter

To enable MAC address filter, perform the following steps:
1. Choose Security>MAC Filtering
2. Set MAC filtering to Enable.
3. Click Submit. As shown in Figure 5-1.

5.1.2 Disabling MAC Filter

To disable MAC address filter, perform the following steps:
1. Choose Security>MAC Filtering
2. Set MAC filtering to Disable.
3. Click Submit. As shown in Figure 5-2.
Figure 5-1
Figure 5-2