Purpose
Command Modes
Syntax
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Purpose
Command Modes
Syntax
Purpose
Command Modes
Syntax
proxy-authentication
Use this command to enable L2TP proxy authentication in the
VPDN group.
VPDN group configuration
proxy-authentication
no proxy-authentication
service-type
Use this command to configure the service type of local VPDN
group. The service type distinguishes the tunnel identity to LNS
or LAC.
VPDN group configuration
service-type [lac | lns]
no service-type
lac
lns
The no form of this command is used to restore the default service
type, LAC.
show vpdn session
Use this command to display summary information about all ses-
sions.
Global configuration
show vpdn session
show vpdn tunnel
Use this command to display information about the VPDN tunnel.
Privileged EXEC
show vpdn tunnel {all | local-tunnel-id <tunnel-id>[local-se
ssion <session-id>]| remote-name <remote-name>[local-ses
sion <session-id>]}
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 10 L2TP Configuration
L2TP is LAC
L2TP is LNS
111