Dell Z9500 Command Reference Manual page 1452

Hide thumbs Also See for Z9500:

Table of Contents

primary vlan-id

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.2(1.0)

Version 8.3.11.1

Version 8.3.7.1

Version 7.8.1.0

Examples of all types of command output are shown below. The first type of

output is the result of not entering an optional keyword. It displays a detailed list of

all PVLANs and their member VLANs and interfaces. The other types of output

show details about PVLAN subsets.

The following describes the show private-vlan command shown in the

Examples below.

(OPTIONAL) Enter the keyword community and a PVLAN ID

number to display the configuration for a community PVLAN.

(OPTIONAL) Enter the keyword interface followed by the

interface type and slot/port numbers or port-channel

number to display the PVLAN configuration for a member

interface. The range of Z9500 slot IDs is 0 to 2. The valid

port-channel port-channel-number

tengigabitethernet slot/port

fortygigE slot/port

(OPTIONAL) Enter the keyword isolated and a PVLAN ID

number to display the configuration of an isolated PVLAN.

(OPTIONAL) Enter the keyword mapping to display the

community and isolated PVLAN mapping to primary PVLANs.

(OPTIONAL) Enter the keyword primary and a PVLAN ID

number to display the configuration of a primary PVLAN.

EXEC Privilege

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the C-Series and S-Series.

Private VLAN (PVLAN)