Trust - Dell Z9500 Command Reference Manual

Version
6.1.1.1
Usage To configure the minimum and maximum threshold values for user-defined
Information profiles, use this command. Additionally, to modify the minimum and maximum
threshold values for the pre-defined WRED profiles, use this command. If you
delete the threshold values of the pre-defined WRED profiles, the profiles revert to
their original default values.
Pre-Defined WRED Profile
Name
wred_drop
wred_ge_y
wred_ge_g
wred_teng_y
wred_teng_g
Related wred-profile
Commands

trust

Specify dynamic classification (DSCP) or dot1p to trust.
Z9500
Syntax
trust {diffserv [fallback]| dot1p [fallback]}
Parameters
diffserv
dot1p
fallback
Defaults none
Command CONFIGURATION (conf-policy-map-in)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1522
Description
Introduced on the E-Series.
Minimum Threshold
0
1024
2048
4096
8192
— creates a WRED profile.
Enter the keyword diffserv to specify trust of DSCP
markings.
Enter the keyword dot1p to specify trust dot1p
configuration.
Enter the keyword fallback to classify packets according
to their DSCP value as a secondary option in case no match
occurs against the configured class maps.
Maximum Threshold
0
2048
4096
8192
16384
Quality of Service (QoS)