Show Rmon Alarms - Dell Z9500 Command Reference Manual

Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Example
Dell# show rmon
RMON status
Dell#

show rmon alarms

Display the contents of the RMON alarm table.
Z9500
Syntax
show rmon alarms [index] [brief]
Parameters
index
brief
Defaults none
1568
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
total memory used 218840 bytes.
ether statistics table: 8 entries, 4608 bytes
ether history table: 8 entries, 6000 bytes
alarm table: 390 entries, 102960 bytes
high-capacity alarm table: 5 entries, 1680 bytes
event table: 500 entries, 206000 bytes
log table: 2 entries, 552 bytes
(OPTIONAL) Enter the table index number to display just that
entry.
(OPTIONAL) Enter the keyword brief to display the RMON
alarm table in an easy-to-read format.
Remote Monitoring (RMON)