Threshold - Dell Z9500 Command Reference Manual

Linecard|Portpipe|CAM Partition|Available CAM|Estimated CAM|
Status
(Allowed ports)
0
Allowed (2)
0
Exception
1
Allowed (5)
1
Exception
13
Allowed (2)
Dell#

threshold

Specify the minimum and maximum threshold values for the configured WRED profiles.
Z9500
Syntax
threshold min number max number
To remove the threshold values, use the no threshold min number max
number command.
Parameters
min number
max number
Defaults none
Command CONFIGURATION (config-wred)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.8.0
Quality of Service (QoS)
| |
0 L2ACL
1 L2ACL
0 L2ACL
1 L2ACL
...
...
...
1 L2ACL
Enter the keyword min then the minimum threshold number
for the WRED profile. The range is from 0 to 12000KB.
Enter the keyword max then the maximum threshold number
for the WRED profile. The range is from 0 to 12000KB.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
| |per Port
500 200
100 200
1000 200
0 200
400 200
|
1521