Keyless Receiver Unit Input Test - Honda 2004 Odyssey Service Manual

Hide thumbs Also See for 2004 Odyssey:

Table of Contents

Power Door Locks/Factory Keyless/Factory Security

Keyless Receiver Unit Input Test

1. Remove the glove box (see page 20-71).

2. Disconnect the 14P connector (A) from the keyless receiver unit (B).

3. Inspect the all connector and socket terminals to be sure they are all making good contact.

• If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.

• If the terminals look OK, go to step 4.

Wire side of female terminals

Table of Contents