Honda 2004 Odyssey Service Manual page 2382

8. Turn the ignition switch OFF.
9. Backprobe the No. 4 terminal of gauge assembly
connector A (14P). Do not disconnect gauge
assembly connector A (14P) from the gauge
assembly (see page 22-100).
10. Turn the ignition switch ON (II).
11. Check for voltage between the No. 4 terminal of
gauge assembly connector A (14P) and body
ground. There should be battery voltage.
GAUGE ASSEMBLY CONNECTOR A (14P)
Wire side of female terminals
Is there battery voltage?
YES Go to step 12.
NO Go to step 16.
GRN
12. Turn the ignition switch OFF.
13. Disconnect the right side wire harness 4P
connector (A) from the OPDS unit harness 4P
connector (B).
B
A
(cont'd)
23-317