Honda 2004 Odyssey Service Manual page 2431

SRS
Symptom Troubleshooting (cont'd)
5. Disconnect SRS main harness 28P connector (A)
from the SRS floor harness connector C851.
C851
6. Check resistance between the No. 9 terminal of
gauge assembly connector C (16P) and the No. 25
terminal of SRS main harness 28P connector .
There should be 0 1.0
SRS MAIN HARNESS 28P CONNECTOR
Wire side of female terminals
GAUGE ASSEMBLY CONNECTOR C (16P)
BLU
Wire side of female terminals
Is the resistance as specif ied?
YES Open in the SRS floor harness; replace the
SRS floor harness.
NO Go to step 7.
23-366
A
.
BLU
7. Disconnect the dashboard wire harness 8P
connector C503 from the SRS main harness (A).
A
8. Check resistance between the No. 9 terminal of
gauge assembly connector C (16P) and the No. 6
terminal of the dashboard wire harness 8P
connector C503. There should be
DASHBOARD WIRE HARNESS 8P CONNECTOR C503
Terminal side of
male terminals
BLU
GAUGE ASSEMBLY CONNECTOR C (16P)
BLU
Wire side of female terminals
Is the resistance as specif ied?
YES Open in the SRS main harness; replace the
SRS main harness.
NO Open in the dashboard wire harness; replace
the dashboard wire harness.
C503
0 1.0 .