Hood Switch Test - Honda 2004 Odyssey Service Manual

Hide thumbs Also See for 2004 Odyssey:

Table of Contents

Power Door Locks/Factory Keyless/Factory Security

Hood Switch Test

1. Open the hood.

2. Disconnect the 2P connector from the hood switch.

3. Check for continuity between the terminals.

• There should be continuity between the No. 1

and No. 2 terminals when the hood is opened

(lever released).

• There should be no continuity between the No. 1

and No. 2 terminals when the hood is closed

(lever pushed down).

4. If the continuity is not as specified, replace the

Table of Contents