Honda 2004 Odyssey Service Manual page 2093

SRS
Precautions and Procedures (cont'd)
Disconnecting System Connectors ('99-01 Models)
Before removing a front airbag or other SRS related devices (the SRS unit, the cable reel and the seat belt tensioner
connector), disconnecting connectors from related devices, or removing the dashboard or the steering column,
disconnect the airbag connectors and seat belt tensioner connectors to prevent accidental deployment.
Turn the ignition switch OFF, disconnect the negative cable from the battery, and wait at least 3 minutes before
beginning the following procedures.
• Before disconnecting the SRS unit 18P connector (A) from the SRS unit, disconnect both airbag 2P connectors (C, D)
and both seat belt tensioner 2P connectors (F, H).
• Before disconnecting the cable reel 2P connector (B), disconnect the driver's airbag 2P connector (C).
• Before disconnecting the left side wire harness 2P connector (E), disconnect the driver's seat belt tensioner 2P
connector (F).
• Before disconnecting the right side wire harness 2P connector (G), disconnect the front passenger's seat belt
tensioner 2P connector (H).
23-28