Table of Contents
Advertisement
SRS
Symptom Troubleshooting (cont'd)
47. Disconnect the SRS main harness 28P connector
(A) from the SRS floor harness 28P connector C851.
C851
A
48. Check resistance between the No. 9 terminal of
gauge assembly connector C (16P) and the No. 25
terminal of the SRS main harness 28P connector.
There should be 1
SRS MAIN HARNESS 28P CONNECTOR
Wire side of female terminals
GAUGE ASSEMBLY CONNECTOR C (16P)
BLU
Wire side of female terminals
Is the resistance as specif ied?
YES
Open in the SRS floor harness; replace the
SRS floor harness.
NO
Open in the BLU wire of the dashboard wire
harness or in the SRS main harness; replace the
faulty harness.
23-360
or less.
Advertisement
Chapters
Table of Contents
Troubleshooting
