Honda 2004 Odyssey Service Manual page 2336

8. Disconnect the both seat belt tensioner 2P
connectors from the side wire harness (A).
9. Disconnect SRS unit connector B (28P) from the
SRS unit.
10. Check resistance between the No. 19 and No. 20
terminals of SRS unit connector B (28P). There
should be 0 1.0
A
GRN/WHT
Is the resistance as specif ied?
YES
unit; replace the driver's side impact sensor (see
B
page 23-386). If the problem is still present, replace
the SRS unit (see page 23-384).
NO
.
SRS UNIT CONNECTOR B (28P)
LT GRN
Wire side of female terminals
Faulty driver's side impact sensor or SRS
Go to step 11.
(cont'd)
23-271