SRS
DTC Troubleshooting (cont'd)
20. Disconnect the SRS main harness 28P connector
21. Check resistance between the No. 5 terminal of the
(A) from the SRS floor harness 28P connector C851.
SRS main harness 28P connector and body ground,
between the No. 14 terminal and body ground.
There should be an open circuit, or at least 1 M .
SRS MAIN HARNESS 28P CONNECTOR
C851
A
Wire side of female terminals
Is the resistance as specif ied?
YES
Replace the SRS floor harness.
NO
Replace the SRS main harness.
23-130