Honda 2004 Odyssey Service Manual page 2185

SRS
DTC Troubleshooting (cont'd)
16. Disconnect the driver's airbag connector (A), front
passenger's airbag connector (B), and front
passenger's seat belt tensioner connector (C).
A
B
C
23-120
17. Disconnect SRS unit connector A (18P) from the
SRS unit. Do not disconnect the special tool from
the left side wire harness 2P connector.
18. Check resistance between the No. 8 terminal and
the No. 17 terminal of SRS unit connector A (18P).
There should be 2.0 3.0
SRS UNIT CONNECTOR A (18P)
Wire side of female terminals
Is the resistance as specif ied?
YES Faulty SRS unit or poor contact at SRS unit
connector A (18P) and the SRS unit. Check the
connection; if the connection is OK, replace the
SRS unit (see page 23-382).
NO Go to step 19.
A
.