Honda 2004 Odyssey Service Manual page 2268

12. Check resistance between the terminals of SRS
simulator lead F. There should be 1
CABLE
REEL 4P CONNECTOR
07XAZ-SZ30100
Is the resistance as specif led?
YES Faulty SRS unit or poor contact at SRS unit
connector A (28P) and the SRS unit. Check the
connection between the connector and the SRS
unit. If the connection is OK, replace the SRS unit
(see page 23-382).
NO Go to step 13.
13. Disconnect the SRS floor harness 28P connector (A)
from SRS main harness 28P connector C851.
A
14. Check resistance between the No. 9 and No. 10
or less. terminals of the SRS floor harness 28P connector
C851, and between the No. 3 and No. 4 terminals.
There should be 1
GRN/YEL
Is the resistance as specif ied?
YES
NO
harness; replace the SRS floor harness.
15. Disconnect the cable reel 4P connector from the
SRS main harness.
16. Connect the SRS inflator simulator to SRS
simulator lead F.
C851
or less.
SRS FLOOR HARNESS 28P CONNECTOR C851
GRN/WHT
Terminal side of male terminals
Go to step 15.
Open or increased resistance in the SRS floor
GRN GRN/
BLK
(cont'd)
23-203