Honda 2004 Odyssey Service Manual page 2311

SRS
DTC Troubleshooting (cont'd)
12. Disconnect the SRS inflator simulator from SRS
simulator lead E.
13. Check resistance between the terminals of SRS
simulator lead E. There should be 1.0
LEFT SIDE WIRE HARNESS
2P CONNECTOR
07XAZ-S1A0200
Is the resistance as specif ied?
YES Faulty SRS unit or poor contact at SRS unit
connector B (28P) and the SRS unit. Check the
connection; if the connection is OK, replace the
SRS unit (see page 23-384).
NO Go to step 14.
23-246
14. Disconnect the SRS floor harness 28P connector (A)
from SRS floor subharness C852.
or less.
15. Check resistance between the No. 21 and No. 22
terminals of the SRS floor harness 28P connector.
There should be 1.0
Is the resistance as specif ied?
YES
floor subharness or left side wire harness; replace
the faulty harness.
NO
harness; replace the SRS floor harness.
C852
or less.
SRS FLOOR HARNESS 28P CONNECTOR
GRN/YEL GRN
Terminal side of male terminals
Open or increased resistance in the SRS
Open or increased resistance in the SRS floor
A