Honda 2004 Odyssey Service Manual page 2353

SRS
DTC Troubleshooting (cont'd)
11. Check resistance between the No. 2 terminal of the
driver's seat wire harness (with power seat) or left
side wire harness (without power seat) 3P
connector and body ground. There should be an
open circuit, or at least 1 M .
DRIVER'S SEAT WIRE HARNESS 3P CONNECTOR
(WITH POWER SEAT)
LEFT SIDE WIRE HARNESS 3P CONNECTOR
(WITHOUT POWER SEAT)
Wire side of female terminals
Is the resistance as specif ied?
YES Go to step 12.
NO Short to ground in the driver's seat wire
harness (with power seat), left side wire harness,
dashboard wire harness A, SRS main harness, SRS
floor harness or multiplex control unit, or gauge
assembly; replace the faulty harness or part.
23-288
RED/BLU
12. Check resistance between the No. 3 terminal of the
driver's seat wire harness (with power seat) or left
side wire harness (without power seat) 3P
connector and body ground. There should be an
open circuit, or at least 1 M .
DRIVER'S SEAT WIRE HARNESS 3P CONNECTOR
(WITH POWER SEAT)
LEFT SIDE WIRE HARNESS 3P CONNECTOR
(WITHOUT POWER SEAT)
Wire side of female terminals
Is the resistance as specif ied?
YES Replace the SRS unit (see page 23-384).
NO Short to ground in the driver's seat wire
harness (with power seat), dashboard wire harness
A, SRS main harness or SRS floor harness; replace
the faulty harness.
BLU