Table of Contents
Advertisement
SRS
DTC Troubleshooting (cont'd)
16. Disconnect the driver's airbag connector (A), front
passenger's airbag connector (B), and front
passenger's seat belt tensioner connector (C).
A
B
C
23-126
17. Disconnect SRS unit connector A (18P) from the
SRS unit.
18. Disconnect the special tool from the SRS main
harness 2P connector.
19. Reconnect the battery negative cable.
20. Turn the ignition switch ON (II).
21. Check for voltage between the No. 8 terminal of
SRS unit connector A (18P) and body ground, and
between the No. 17 terminal and body ground.
There should be 0.5 V or less.
SRS UNIT CONNECTOR A (18P)
Wire side of female terminals
Is the voltage as specif ied?
YES
Faulty SRS unit; replace the SRS unit (see
page 23-382).
NO
Go to step 22.
A
Advertisement
Chapters
Table of Contents
Troubleshooting
