Table of Contents
Advertisement
SRS
Symptom Troubleshooting (cont'd)
14. Turn the ignition switch ON (II).
15. Connect a voltmeter between the No. 9 terminal of
gauge assembly connector C (16P) and body
ground. Turn the ignition switch ON (II), and
measure the voltage. There should be 0.5 V or less.
GAUGE ASSEMBLY CONNECTOR C (16P)
BLU
Wire side of female terminals
Is the voltage as specif ied?
YES
Short to power in the SRS floor harness;
replace the SRS floor harness.
NO
Short to power in the BLU wire of the
dashboard wire harness or in the SRS main
harness; replace the faulty harness.
23-352
Advertisement
Chapters
Table of Contents
Troubleshooting
