Honda 2004 Odyssey Service Manual page 2016

DVD Player Unit Connector Inputs and Outputs
When replacing a DVD player unit connector, match the wires to the cavities listed in the following table.
Cavity Wire
A1 WHT/BLU Constant power
A2 WHT/RED ACC (Main stereo power
supply)
A3 Not used
A4 ORN Audio unit (L ch1)
A5 ORN/BLU Audio unit (R ch1)
A6 YEL Audio unit (serial data input)
A7 BLU Audio unit (serial ground)
A8 Not used
A9 BLU Audio unit (video 1)
A10 Not used
A11 BLU Audio unit (security input)
A12 YEL/RED Dash lights for audio unit, rear
controller and screen and
auxiliary jack assembly
A13 RED/BLK Lights-on signal
Cavity Wire
B1 YEL Auxiliary jack assembly (L ch3)
B2 GRN Auxiliary jack assembly (R ch3)
B3 BLU Auxiliary jack assembly
(video 3)
B4 WHT/GRN Auxiliary jack assembly
(communication line check)
Connect to Cavity
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
Connect to Cavity
Wire
BLK Ground (G502)
Not used
Not used
BLU/GRN Audio unit (audio 1 ground)
BRN Audio unit (audio 1 shielding)
GRN Audio unit (serial data output)
BRN/WHT Audio unit (serial shielding)
Not used
RED Audio unit (video 1 ground)
BRN/BLK Audio unit (video 1 shielding)
GRN Rear controller and screen
(security input)
Not used
RED Dash lights brightness controller
Wire
B5 BLU Auxiliary jack assembly (audio 3
ground)
B6 BRN/WHT Auxiliary jack assembly (audio 3
shielding)
B7 RED Auxiliary jack assembly (video 3
ground)
B8 BRN/BLK Auxiliary jack assembly (video 3
shielding)
Connect to
Connect to
(cont'd)
22-337