Honda 2004 Odyssey Service Manual page 2415

SRS
Symptom Troubleshooting (cont'd)
5. Turn the ignition switch OFF.
6. Disconnect SRS unit connector A (18P) from the
SRS unit .
7. Connect a voltmeter between the No. 9 terminal of
gauge assembly connector C (16P) and body
ground. Turn the ignition switch ON (II), and
measure voltage. There should be 0.5 V or less.
GAUGE ASSEMBLY CONNECTOR C (16P)
BLU
Wire side of female terminals
Is the voltage as specif ied?
YES Faulty SRS unit; replace the SRS unit (see
page 23-382).
NO Go to step 12.
23-350
A
8. Turn the ignition switch OFF. Check the No. 9 (10A)
fuse in the under-dash fuse/relay box.
Is the f use blown?
YES Go to step 11.
NO Go to step 9.
9. Disconnect gauge assembly connector B (22P) from
the gauge assembly (see page 22-100).
B