Honda 2004 Odyssey Service Manual page 2245

SRS
DTC Troubleshooting (cont'd)
8. Disconnect SRS unit connector B (18P) from the
SRS unit.
9. Check resistance between the No. 8 and No. 15
terminals of SRS unit connector B (18P). There
should be 0 1.0
SRS UNIT CONNECTOR B (18P)
Wire side of female terminals
Is the resistance as specif ied?
YES Faulty driver's side impact sensor or SRS
unit; replace the driver's side impact sensor (see
page 23-385). If the problem is still present, replace
the SRS unit (see page 23-382).
NO Go to step 10.
23-180
B
.
10. Disconnect the SRS floor subharness 28P
connector (A) from the SRS floor harness 28P
connector C852.
C852
A
11. Check resistance between the No. 18 and No. 17
terminals of the SRS floor subharness 28P
connector. There should be 0 1.0
SRS FLOOR SUBHARNESS 28P CONNECTOR
Wire side of female terminals
Is the resistance as specif ied?
YES Open in the SRS floor harness; replace the
SRS floor harness.
NO Open in the SRS floor subharness or left side
wire harness; replace the faulty harness.
.