Honda 2004 Odyssey Service Manual page 2204

22. Turn the ignition switch OFF.
23. Disconnect the SRS main harness 28P connector
(A) from the SRS floor harness 28P connector C851.
C851
A
24. Turn the ignition switch ON (II).
25. Check for voltage between the No. 6 terminal of the
SRS main harness 28P connector and body ground,
and between the No. 15 terminal and body ground.
There should be 0.5 V or less.
SRS MAIN HARNESS 28P CONNECTOR
Wire side of female terminals
Is the voltage as specif ied?
YES Short to power in the SRS floor harness;
replace the SRS floor harness.
NO Short to power in the SRS main harness;
replace the SRS main harness.
23-139