Honda 2004 Odyssey Service Manual page 2364

Hide thumbs Also See for 2004 Odyssey:
Table of Contents

Advertisement

10. Disconnect both seat belt tensioner 2P connectors
from the side wire harness 2P connectors (A).
11. Disconnect SRS unit connector B (28P) from the
SRS unit.
12. Check resistance between the No. 16 terminal of
SRS unit connector B (28P) and body ground, and
the No. 28 terminal and body ground. There should
an open circuit, or at least 1 M .
A
Is the resistance as specif ied?
YES
B
connector B (28P) and the SRS unit. Check the
connection; if the connection is OK, replace the
SRS unit (see page 23-384).
NO
13. Disconnect SRS floor subharness 28P connector (A)
from the SRS floor harness connector C852.
SRS UNIT CONNECTOR B (28P)
GRN/RED
Wire side of female terminals
Faulty SRS unit, or poor contact at SRS unit
Go to step 13.
C852
GRN/YEL
A
(cont'd)
23-299

Advertisement

Table of Contents
loading

Table of Contents