SRS
Front Passenger's Airbag Replacement
Removal ('99-01 Models)
1. Disconnect the battery negative cable, and wait at
least 3 minutes before beginning work.
2. Remove the glove box (see page 20-71), then
disconnect the connector between the SRS main
harness 2P connector (A) and the front passenger's
airbag 2P connector (B).
B
A
3. Remove the four mounting nuts (A) from the
bracket. Cover the lid and dashboard with a cloth,
and pry carefully with a screwdriver to lift the front
passenger's airbag (B) out of the dashboard.
NOTE: The airbag lid has pawls on its side which
attach it to the dashboard.
B
A
23-370
Removal ('02-04 Models)
1. Disconnect the battery negative cable, and wait at
least 3 minutes before beginning work.
2. Remove the glove box (see page 20-71).
3. Disconnect the connector between the front
passenger's airbag 4P connector (A) and the
dashboard wire harness B 4P connector (B).
B
A
4. Remove the four mounting nuts (A) from the
bracket. Cover the lid and dashboard with a cloth,
and pry carefully with a screwdriver to lift the front
passenger's airbag (B) out of the dashboard.
NOTE: The airbag lid has pawls on its side which
attach it to the dashboard.
B
A