Honda 2004 Odyssey Service Manual page 2392

11. Disconnect SRS unit connector A (28P) from the
SRS unit.
A
12. Reconnect the dashboard wire harness A 4P
connector to the passenger's airbag cutoff indicator.
13. Reconnect the battery negative cable.
14. Connect the No. 20 terminal of SRS unit connector
15. Turn the ignition switch ON (II).
16. Check the passenger's airbag cutoff indicator.
A
17. Turn the ignition switch OFF.
18. Disconnect the jumper wire.
19. Disconnect the dashboard wire harness A 4P
A (28P) to body ground with a jumper wire.
SRS UNIT CONNECTOR A (28P)
JUMPER RED/BLU
WIRE
Wire side of female terminals
Does the passenger's airbag cutof f indicator come
on?
YES Faulty SRS unit; replace the SRS unit (see
page 23-384).
NO Go to step 17.
connector from the passenger's airbag cutoff
indicator again.
A
(cont'd)
23-327