Honda 2004 Odyssey Service Manual page 2365

Hide thumbs Also See for 2004 Odyssey:
Table of Contents

Advertisement

SRS
DTC Troubleshooting (cont'd)
14. Check resistance between the No. 9 terminal of
SRS floor subharness 28P connector C852 and
body ground, and the No. 10 terminal and body
ground. There should be an open circuit, or at least
1 M .
SRS FLOOR SUBHARNESS 28P CONNECTOR C852
Wire side of female terminals
Is the resistance as specif ied?
YES
Short to ground in the SRS floor harness;
replace the SRS floor harness.
NO
Go to step 15.
15. Disconnect SRS floor subharness 3P connector
C558 from the left side wire harness.
16. Check resistance between the No. 2 terminal of left
side wire harness 3P connector C558 and body
ground, and the No. 3 terminal and body ground.
There should be an open circuit, or at least 1 M .
LEFT SIDE WIRE HARNESS 3P CONNECTOR C558
GRN/RED
Wire side of female terminals
Is the resistance as specif ied?
YES
Short to ground in the SRS floor subharness;
replace the SRS floor subharness.
NO
Go to step 17.
23-300
GRN/YEL
GRN/
RED
GRN/YEL
17. Disconnect left side wire harness 12P connector C
552 from driver's seat wire harness (with power
seat) or left side wire harness 2P connector C559
from the seat position sensor subharness (without
power seat).
18. Check resistance between the No. 5 terminal of
driver's seat wire harness 12P connector C552 and
body ground, and the No. 12 terminal and body
ground (with power seat) or between the No. 1
terminal of seat position sensor subharness 2P
connector C559 and body ground, and the No. 2
terminal and body ground (without power seat).
There should be an open circuit, or at least 1 M .
DRIVER'S SEAT WIRE HARNESS 12P CONNECTOR C552
(WITH POWER SEAT)
Terminal side of male terminals
DRIVER'S SEAT POSITION SENSOR SUBHARNESS C559
2P CONNECTOR
(WITHOUT POWER SEAT)
WHT
Terminal side of male terminals
Is the resistance as specif ied?
YES
Short to ground in the left side wire harness;
replace the left side wire harness.
NO
Short to ground in the driver's seat wire
harness (with power seat) or seat position sensor
subharness (without power seat); replace the faulty
harness.
WHT
BLK
BLK

Advertisement

Table of Contents
loading

Table of Contents