Honda 2004 Odyssey Service Manual page 2386

7. Disconnect the SRS main harness 8P connector
C503 from the dashboard wire harness A.
C503
8. Check resistance between the No. 19 terminal of
SRS unit connector A (28P) and the No. 6 terminal
of SRS main harness 8P connector C503. There
should be 0 1.0 .
SRS MAIN HARNESS SRS UNIT CONNECTOR A (28P)
8P CONNECTOR C503
BLU
BLU
Wire side of female terminals
Is the resistance as specif ied?
YES Open in dashboard wire harness A; replace
dashboard wire harness A.
NO Go to step 9.
9. Disconnect SRS floor harness 28P connector (A)
from the SRS main harness connector C851.
A
10. Check resistance between the No. 19 terminal of
SRS unit connector A (28P) and the No. 25 terminal
of SRS floor harness 28P connector C851. There
should be 0 1.0 .
SRS UNIT CONNECTOR A (28P)
Wire side of female terminals
BLU
SRS FLOOR HARNESS 28P CONNECTOR C851
Terminal side of male terminals
Is the resistance as specif ied?
YES Open in the SRS main harness; replace the
SRS main harness.
NO Open in the SRS floor harness; replace the
SRS floor harness.
C851
BLU
(cont'd)
23-321