Table of Contents
Advertisement
SRS
DTC Troubleshooting (cont'd)
17. Disconnect the SRS main harness 28P connector
18. Check resistance between the No. 9 terminal of the
(A) from the SRS floor harness 28P connector C851.
SRS main harness 28P connector and body ground,
the No. 10 terminal and body ground, the No. 3
terminal and body ground, and No. 4 terminal and
body ground. There should be an open circuit, or at
least 1 M .
SRS MAIN HARNESS 28P CONNECTOR
C851
A
Wire side of female terminals
Is the resistance as specif ied?
YES
Replace the SRS floor harness.
NO
Replace the SRS main harness.
23-110
Advertisement
Chapters
Table of Contents
Troubleshooting
