Table of Contents
Advertisement
SRS
DTC Troubleshooting (cont'd)
20. Disconnect SRS floor harness 28P connector (A)
21. Check resistance between the No. 5 and No. 14
from the SRS main harness connector C851.
terminals of the SRS main harness 28P connector.
There should be an open circuit, or at least 1 M .
SRS MAIN HARNESS 28P CONNECTOR
RED/BLU
RED/WHT
C851
A
Wire side of female terminals
Is the resistance as specif ied?
YES
Short in the SRS floor harness; replace the
SRS floor harness.
NO
Short in the SRS main harness; replace the
SRS main harness.
23-226
Advertisement
Chapters
Table of Contents
Troubleshooting
