Honda 2004 Odyssey Service Manual page 2174

12. Disconnect SRS unit connector A (18P) from the
SRS unit.
13. Disconnect the special tool from the cable reel 4P
connector.
14. Check resistance between the No. 7 terminal of
SRS unit connector A (18P) and body ground, the
No. 16 terminal and body ground, the No. 6
terminal and body ground, and the No. 15 terminal
and body ground. There should be an open circuit,
or at least 1 M .
SRS UNIT CONNECTOR A (18P)
Wire side of female terminals
Is the resistance as specif ied?
YES Faulty SRS unit; replace the SRS unit (see
page 23-382).
NO Go to step 15.
A
15. Disconnect the cable reel from the SRS main
harness.
16. Check resistance between the No. 7 terminal of
SRS unit connector A (18P) and body ground, the
No. 16 terminal and body ground, the No. 6
terminal and body ground, and the No. 15 terminal
and body ground. There should be an open circuit,
or at least 1 M .
SRS UNIT CONNECTOR A (18P)
Wire side of female terminals
Is the resistance as specif ied?
YES Replace the cable reel (see page 23-377).
NO Go to step 17.
(cont'd)
23-109