Honda 2004 Odyssey Service Manual page 2258

29. Disconnect the SRS main harness 8P connector (A)
from the dashboard wire harness 8P connector
C503.
A
30. Check resistance between the No. 1 terminal of the
dashboard wire harness 8P connector and body
ground. There should be an open circuit, or at least
1 M .
DASHBOARD WIRE HARNESS 8P CONNECTOR
Terminal side of male terminals
Is the resistance as specif ied?
YES Short in the SRS main harness; replace the
SRS main harness.
NO Short in the dashboard wire harness, right
side wire harness, or OPDS unit harness; replace
the faulty harness.
31. Disconnect the SRS main harness 28P connector
C503
32. Check resistance between the No. 16 terminal of
(A) from the SRS floor harness 28P connector C851.
C851
A
the SRS main harness 28P connector and the No. 7
terminal of the OPDS unit harness 8P connector D.
There should be 0 1.0 .
SRS MAIN HARNESS 28P CONNECTOR
OPDS UNIT HARNESS
8P CONNECTOR D
Wire side of female terminals
Is the resistance as specif ied?
YES Open in the SRS floor harness; replace the
SRS floor harness.
NO Go to step 33.
(cont'd)
23-193