SRS
DTC Troubleshooting (cont'd)
11. Disconnect the SRS floor harness 28P connector (A)
12. Check resistance between the No. 18 and No. 17
from SRS floor subharness 28P connector C852.
terminals of the SRS floor subharness 28P
connector. There should be 0 1.0
.
SRS FLOOR SUBHARNESS 28P CONNECTOR
A
LT GRN
GRN/WHT
Wire side of female terminals
C852
Is the resistance as specif ied?
YES
Open in the SRS floor harness; replace the
SRS floor harness.
NO
Open in the SRS floor subharness or left side
wire harness; replace the faulty harness.
23-272