SRS
DTC Troubleshooting (cont'd)
20. Disconnect SRS floor harness 28P connector (A)
21. Check resistance between the No. 6 terminal of the
from the SRS main harness 28P connector C851.
SRS main harness 28P connector and body ground,
and between the No. 15 terminal and body ground.
There should be an open circuit, or at least 1 M .
SRS MAIN HARNESS 28P CONNECTOR
RED/YEL
RED/BLK
C851
A
Wire side of female terminals
Is the resistance as specif ied?
YES
Replace the SRS floor harness.
NO
Replace the SRS main harness.
23-244