Third Row Seat Belt Replacement - Honda 2004 Odyssey Service Manual

Third Row Seat Belt Replacement

NOTE: Check the third row seat belts for damage, and
replace them if necessary.
Third Row Seat Belt
1. Pull the lower anchor cover (A) back, and remove
the lower anchor bolt (B).
A
B
7/16-20 UNF
32 N·m (3.3 kgf·m, 24 lbf·ft)
2. Remove these items:
• Rear side trim panel (see page 20-60)
• Rear pillar trim (see page 20-59)
• Rear pillar duct (see step 13 on page 20-64)
3. Pull the headliner (A) down as necessary, then
remove the upper anchor bolt (B), the retractor bolt
(C), the retractor mounting ET screw (D), then
remove the third row seat belt (E) and retractor (F).
A
E
F
D
6 x 1.0 mm
4 N·m (0.4 kgf·m,
3 lbf·ft)
B
7/16-20 UNF
32 N·m (3.3 kgf·m,
24 lbf·ft)
C
7/16-20 UNF
32 N·m (3.3 kgf·m,
24 lbf·ft)
(cont'd)
23-11