Honda 2004 Odyssey Service Manual page 2200

16. Disconnect the driver's airbag connector (A), front
passenger's airbag connector (B), and driver's seat
belt tensioner connector (C).
A
B
17. Disconnect SRS unit connector A (18P) from the
SRS unit.
18. Disconnect the special tool from the SRS main
harness 2P connector.
19. Check resistance between the No. 9 terminal and
the No. 18 terminals of SRS unit connector A (18P).
There should be an open circuit, or at least 1 M .
C
Is the resistance as specif ied?
YES Faulty SRS unit; replace the SRS unit (see
page 23-382).
NO Go to step 20.
A
SRS UNIT CONNECTOR A (18P)
Wire side of female terminals
(cont'd)
23-135