Table of Contents
Advertisement
38. Check resistance between the No. 9 terminal of
SRS main harness 18P connector and body ground.
There should be 0 1.0
.
SRS MAIN HARNESS 18P CONNECTOR
Wire side of female terminals
Is the resistance as specif ied?
YES
Faulty SRS unit or poor contact at the SRS
main harness 18P connector; check the connection
at the SRS main harness 18P connector and the
SRS unit. If the connection is OK, replace the SRS
unit (see page 23-382).
NO
Open in the SCS line between the No. 9
terminal of the SRS main harness 18P connector
and the No. 9 terminal (brown wire) of the Data Link
Connector (DLC) (16P), or open between the No. 4
terminal of the Data Link Connector (DLC) (16P) and
body ground, then continue troubleshooting.
23-345
Advertisement
Chapters
Table of Contents
Troubleshooting
